Fan or fixture mounted securely, wired correctly, balanced and confirmed running before we leave.
You have a new ceiling fan or fixture sitting in a box, the existing junction box may not be rated for a fan, and matching the wiring colors between old and new isn't obvious.
Most Santa Clara homes built before 1990 have standard light boxes in the ceiling that aren't rated for fan weight or vibration. Installing a fan on a standard box is a safety risk — the fan can work loose over time. We identify this on arrival and swap in a brace-style fan box from the attic side when needed.
Modern ceiling fans increasingly come with remote control receivers that must be wired between the canopy and the motor housing. The wiring is more involved than a standard swap, but it's a routine job. We connect the receiver correctly so your remote controls both fan speed and light independently.
Ceiling fans that wobble usually have unbalanced blades from misaligned blade brackets or incorrect box installation. We diagnose whether the wobble is from the blades or the mount, correct the issue, and verify the fan runs smoothly at all speeds before leaving.
Swapping a dated brass fixture for a modern semi-flush or pendant makes a visible difference in an entry or kitchen without major cost. We replace fixtures in homes throughout Southwest Santa Clara — disconnecting the old fixture, confirming the box and wiring are in good condition, and mounting the new one.
We check whether the existing box is fan-rated — standard light boxes can't support a fan's rotating weight.
If needed, we swap in a fan-rated brace box from the attic side — no ceiling damage.
New fixture is mounted, wired to the switch leg, and confirmed working.
Fan blades are balanced using the included weights if wobble is present.
Doorbell mounted flush, wired correctly, Wi-Fi confirmed, and the app walking you through setup before we leave.
Old caulk fully removed, surface dried and cleaned, new bead applied flush and smooth — ready to use in 24 hours.
TV level on the wall, bracket secured to studs or correct anchors, cables managed and tidy, no visible holes in the wrong spots.
Furniture fully assembled, level, and stable — ready to use the same day, no stripped screws or leftover hardware.
Hole or crack patched flush with the wall surface, textured to match, and primed — ready for paint with no visible seam.
Drip stopped or toilet quieted — cartridge, flapper, or fill valve replaced as needed, confirmed fixed before we leave.
Shelves level, anchors in studs or appropriate hollow-wall hardware, closet system aligned and locked — ready to load.
New lock or deadbolt installed, aligned to the strike plate, and confirmed latching and locking smoothly before we leave.
5 average · 2 verified reviews
See what Santa Clara homeowners say about Send Me A Pro.
View All Reviews on HireNimbus →Request service from Send Me A Pro — Santa Clara's verified home service pro.